PX03 Digital Airbag Inflation Kit 2 Button

Description

Being the next size up in our compressor range, the PX03 produces a bit more air delivery over more run time, so faster bag inflation. With this kit you could also add our small 1 gallon tank to operate low demand air devices as well as tyre top-ups

Control airbag pressure from within the cab of your vehicle with our simple to use two button inflation kit

On our standard Load Assist Kit air pressure is operated via two supplied Schrader valves (like tyre valves)

To achieve the best handling under load it’s important to maintain the correct pressure in the airbags Vs the weight being carried.

When you load up the vehicle and the rear sinks, you will introduce sufficient air to bring the vehicle back to its correct stance

If you want the convenience of adjusting air pressure without having to get out of the vehicle and use an external source such as a remote compressor or popping into a garage then this will be ideal

Use the Up/Down LED buttons to adjust the pressure

The pressure in each bag will present on the dual digital gauge

So when you load the vehicle, drop the tools off, hook up the trailer, boat or caravan you can adjust on the go and maintain that ‘sweet spot’

INSTALLATION

This smaller oil free compressor can be orientated any way and in most cases can be tucked away beneath the bonnet. The wiring is easily popped through into the cab area where the dual digital gauge and actuating LED buttons are installed. Simply ‘T’ into the load assist between the airbags and Schrader valves

This Incab Control system comes with all componentry required for installation including concise instructions and a simplistic diagram

OTHER

There is a three button option should you need to run different pressures either side and would typically be used when there are vast weight differences from one side to the other, or to help level the back when parked on a slope for example

Also see our Onboard Air options